Added validation for multipod_modular_spine_bootscript_check - CSCwr66848 by asraf-khan · Pull Request #365 · datacenter/ACI-Pre-Upgrade-Validation-Script

asraf-khan · 2026-03-11T13:38:59Z

Multipod is not enabled :

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check -t "6.1(5e)"
==== 2026-03-11T10-54-31+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Target APIC version is overridden to 6.1(5e)

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS                        : 0
FAIL - OUTAGE WARNING!!     : 0
FAIL - UPGRADE FAILURE!!    : 0
MANUAL CHECK REQUIRED       : 0
POST UPGRADE CHECK REQUIRED : 0
N/A                         : 1
ERROR !!                    : 0
TOTAL                       : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-11T10-54-31+0000.tgz

==== Script Version v4.0.1 FIN ====

Not matched tversion:

aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check -t "6.1(5h)"
==== 2026-03-11T10-58-01+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Target APIC version is overridden to 6.1(5h)

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS                        : 0
FAIL - OUTAGE WARNING!!     : 0
FAIL - UPGRADE FAILURE!!    : 0
MANUAL CHECK REQUIRED       : 0
POST UPGRADE CHECK REQUIRED : 0
N/A                         : 1
ERROR !!                    : 0
TOTAL                       : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-11T10-58-01+0000.tgz

==== Script Version v4.0.1 FIN ====

Modular spine not found:

python aci-preupgrade-validation-script.py -d multipod_modular_spine_bootscript_check -t "6.1(4h)"
==== 2026-03-11T11-01-52+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.2(1.124)
Lowest Switch Version...6.2(1.110)

Target APIC version is overridden to 6.1(4h)

Collecting VPC Node IDs...111, 112, 113, 114

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS                        : 0
FAIL - OUTAGE WARNING!!     : 0
FAIL - UPGRADE FAILURE!!    : 0
MANUAL CHECK REQUIRED       : 0
POST UPGRADE CHECK REQUIRED : 0
N/A                         : 1
ERROR !!                    : 0
TOTAL                       : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

Result Bundle: /data/techsupport/preupgrade_validator_2026-03-11T11-01-52+0000.tgz

==== Script Version v4.0.1 FIN ====

bootscript not found:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check -t "6.1(5e)"
==== 2026-03-11T10-55-14+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Target APIC version is overridden to 6.1(5e)

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

[Check 1/1] Multi-Pod modular spine bootscript check...                                                            FAIL - OUTAGE WARNING!!
Pod ID Node ID Node Name Model      Bootscript Present Bootstrap file Present
------ ------- --------- -----      ------------------ ----------------------
1       201      FAB3-S1    N9K-C9504 No                  Yes

Recommended Action: Bootscript is missing, delete bootstrap.xml from bootflash
Reference Document: https://datacenter.github.io/ACI-Pre-Upgrade-Validation-Script/validations/#multipod-modular-spine-…

=== Summary Result ===

PASS                        : 0
FAIL - OUTAGE WARNING!!     : 1
FAIL - UPGRADE FAILURE!!    : 0
MANUAL CHECK REQUIRED       : 0
POST UPGRADE CHECK REQUIRED : 0
N/A                         : 0
ERROR !!                    : 0
TOTAL                       : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-11T10-55-14+0000.tgz

==== Script Version v4.0.1 FIN ====

Both bootscript and bootstrap file not found:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check -t "6.1(5e)"
==== 2026-03-11T10-57-39+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Target APIC version is overridden to 6.1(5e)

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

[Check 1/1] Multi-Pod modular spine bootscript check...                                                           FAIL - UPGRADE FAILURE!!
Pod ID Node ID Node Name Model      Bootscript Present Bootstrap file Present
------ ------- --------- -----      ------------------ ----------------------
1       201      FAB3-S1    N9K-C9504 No                  No

Recommended Action: bootscript and bootstrap.xml files are not found, Move to Fix version.
Reference Document: https://datacenter.github.io/ACI-Pre-Upgrade-Validation-Script/validations/#multipod-modular-spine-…

=== Summary Result ===

PASS                        : 0
FAIL - OUTAGE WARNING!!     : 0
FAIL - UPGRADE FAILURE!!    : 1
MANUAL CHECK REQUIRED       : 0
POST UPGRADE CHECK REQUIRED : 0
N/A                         : 0
ERROR !!                    : 0
TOTAL                       : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-11T10-57-39+0000.tgz

==== Script Version v4.0.1 FIN ====

Both bootscript & bootstrap file found:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check -t "6.1(5e)"
==== 2026-03-11T10-56-57+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Target APIC version is overridden to 6.1(5e)

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS                        : 1
FAIL - OUTAGE WARNING!!     : 0
FAIL - UPGRADE FAILURE!!    : 0
MANUAL CHECK REQUIRED       : 0
POST UPGRADE CHECK REQUIRED : 0
N/A                         : 0
ERROR !!                    : 0
TOTAL                       : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-11T10-56-57+0000.tgz

==== Script Version v4.0.1 FIN ====

SSH error for few nodes:

python aci-preupgrade-validation-script.py -d multipod_modular_spine_bootscript_check -t "6.1(4h)"
==== 2026-03-11T12-01-26+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.2(1.124)
Lowest Switch Version...6.2(1.110)

Target APIC version is overridden to 6.1(4h)

Collecting VPC Node IDs...111, 112, 113, 114

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

[Check 1/1] Multi-Pod modular spine bootscript check...                                                                           ERROR !!
Pod ID Node ID Node Name       Model          Bootscript Present                  Bootstrap file Present
------ ------- ---------       -----          ------------------                  ----------------------
1       211      ifav26-spine11 N9K-C9316D-GX Yes                                 Yes
2       212      ifav26-spine12 N9K-C9364C     SSH ERROR: failed to login to host SSH ERROR: failed to login to host
3       213      ifav26-spine13 N9K-C9332C     SSH ERROR: failed to login to host SSH ERROR: failed to login to host

Recommended Action: Bootscript is missing, delete bootstrap.xml from bootflash
Reference Document: https://datacenter.github.io/ACI-Pre-Upgrade-Validation-Script/validations/#multipod-modular-spine-…

=== Summary Result ===

PASS                        : 0
FAIL - OUTAGE WARNING!!     : 0
FAIL - UPGRADE FAILURE!!    : 0
MANUAL CHECK REQUIRED       : 0
POST UPGRADE CHECK REQUIRED : 0
N/A                         : 0
ERROR !!                    : 1
TOTAL                       : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

Result Bundle: /data/techsupport/preupgrade_validator_2026-03-11T12-01-26+0000.tgz

==== Script Version v4.0.1 FIN ====

aci-preupgrade-validation-script.py

lovkeshsharma702

please repro this in local lab, you can change the target version as per version on lab fabric

asraf-khan · 2026-03-16T09:56:27Z

Based on Mail conversation by Satya, i have removed target version 6.1.5 and tested script on our local lab setup tweeking the script and below are the result for the same

### Multipod not enabled:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check
==== 2026-03-16T04-36-12+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Gathering APIC Versions from Firmware Repository...

What is the Target Version? : 1

You have chosen version "6.0(2j)"

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS : 0
FAIL - OUTAGE WARNING!! : 0
FAIL - UPGRADE FAILURE!! : 0
MANUAL CHECK REQUIRED : 0
POST UPGRADE CHECK REQUIRED : 0
N/A : 1
ERROR !! : 0
TOTAL : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

  Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-16T04-36-12+0000.tgz

==== Script Version v4.0.1 FIN ====
fab3-apic1#

### both files are found:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check
==== 2026-03-16T04-50-48+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Gathering APIC Versions from Firmware Repository...

What is the Target Version? : 1

You have chosen version "6.0(2j)"

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS : 1
FAIL - OUTAGE WARNING!! : 0
FAIL - UPGRADE FAILURE!! : 0
MANUAL CHECK REQUIRED : 0
POST UPGRADE CHECK REQUIRED : 0
N/A : 0
ERROR !! : 0
TOTAL : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

  Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-16T04-50-48+0000.tgz

==== Script Version v4.0.1 FIN ====

### bootscript file is missing:

fab3-apic1# python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check
==== 2026-03-16T04-51-41+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Gathering APIC Versions from Firmware Repository...

What is the Target Version? : 1

You have chosen version "6.0(2j)"

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

[Check 1/1] Multi-Pod modular spine bootscript check... FAIL - OUTAGE WARNING!!
Pod ID Node ID Node Name Model Bootscript Present Bootstrap file Present

1 201 FAB3-S1 N9K-C9504 No Yes

Recommended Action: Delete bootstrap.xml from /bootflash folder and do clean reboot
Reference Document: https://datacenter.github.io/ACI-Pre-Upgrade-Validation-Script/validations/#multipod-modular-spine-bootscript-check

=== Summary Result ===

PASS : 0
FAIL - OUTAGE WARNING!! : 1
FAIL - UPGRADE FAILURE!! : 0
MANUAL CHECK REQUIRED : 0
POST UPGRADE CHECK REQUIRED : 0
N/A : 0
ERROR !! : 0
TOTAL : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

  Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-16T04-51-41+0000.tgz

==== Script Version v4.0.1 FIN ====
fab3-apic1#

### both files are not found:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check
==== 2026-03-13T09-57-23+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Gathering APIC Versions from Firmware Repository...

What is the Target Version? : 1

You have chosen version "6.0(2j)"

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

[Check 1/1] Multi-Pod modular spine bootscript check... FAIL - UPGRADE FAILURE!!
Pod ID Node ID Node Name Model Bootscript Present Bootstrap file Present

1 201 FAB3-S1 N9K-C9504 No No

Recommended Action: Move to Fix version.
Reference Document: https://datacenter.github.io/ACI-Pre-Upgrade-Validation-Script/validations/#multipod-modular-spine-bootscript-check

=== Summary Result ===

PASS : 0
FAIL - OUTAGE WARNING!! : 0
FAIL - UPGRADE FAILURE!! : 1
MANUAL CHECK REQUIRED : 0
POST UPGRADE CHECK REQUIRED : 0
N/A : 0
ERROR !! : 0
TOTAL : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

  Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-13T09-57-23+0000.tgz

==== Script Version v4.0.1 FIN ====

… to remove 6.1.5 version

docs/docs/validations.md

aci-preupgrade-validation-script.py

docs/docs/validations.md

asraf-khan · 2026-03-17T06:09:41Z

Updated result after removing bootstrap validation:

Multi pod not enabled:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check
==== 2026-03-17T04-32-14+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Gathering APIC Versions from Firmware Repository...

What is the Target Version? : 1

You have chosen version "6.0(2j)"

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS : 0
FAIL - OUTAGE WARNING!! : 0
FAIL - UPGRADE FAILURE!! : 0
MANUAL CHECK REQUIRED : 0
POST UPGRADE CHECK REQUIRED : 0
N/A : 1
ERROR !! : 0
TOTAL : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

  Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-17T04-32-14+0000.tgz

==== Script Version v4.0.1 FIN ====
fab3-apic1#

Bootscript not found:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check
==== 2026-03-17T04-35-26+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Gathering APIC Versions from Firmware Repository...

What is the Target Version? : 1

You have chosen version "6.0(2j)"

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

[Check 1/1] Multi-Pod modular spine bootscript check... FAIL - OUTAGE WARNING!!
Pod ID Node ID Node Name Model Bootscript Present

1 201 FAB3-S1 N9K-C9504 No

Recommended Action: clean reboot on impacted spine
Reference Document: https://datacenter.github.io/ACI-Pre-Upgrade-Validation-Script/validations/#multipod-modular-spine-bootscript-check

=== Summary Result ===

PASS : 0
FAIL - OUTAGE WARNING!! : 1
FAIL - UPGRADE FAILURE!! : 0
MANUAL CHECK REQUIRED : 0
POST UPGRADE CHECK REQUIRED : 0
N/A : 0
ERROR !! : 0
TOTAL : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

  Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-17T04-35-26+0000.tgz

==== Script Version v4.0.1 FIN ====

Bootscript is present:

python3 aci-preupgrade-validation-Asraf-script.py -d multipod_modular_spine_bootscript_check
==== 2026-03-17T04-38-45+0000, Script Version v4.0.1 ====

!!!! Check https://github.com/datacenter/ACI-Pre-Upgrade-Validation-Script for Latest Release !!!!

To use a non-default Login Domain, enter apic#DOMAIN\USERNAME
Enter username for APIC login : admin
Enter password for corresponding User :

Gathering Node Information...

Current APIC Version...6.0(2j)
Lowest Switch Version...4.2(3j)

Gathering APIC Versions from Firmware Repository...

What is the Target Version? : 1

You have chosen version "6.0(2j)"

Collecting VPC Node IDs...

Progress: |████████████████████████████████████████████████████████████████████████████████████████████████████| 1/1 checks completed

=== Check Result (failed only) ===

=== Summary Result ===

PASS : 1
FAIL - OUTAGE WARNING!! : 0
FAIL - UPGRADE FAILURE!! : 0
MANUAL CHECK REQUIRED : 0
POST UPGRADE CHECK REQUIRED : 0
N/A : 0
ERROR !! : 0
TOTAL : 1

Pre-Upgrade Check Complete.
Next Steps: Address all checks flagged as FAIL, ERROR or MANUAL CHECK REQUIRED

Result output and debug info saved to below bundle for later reference.
Attach this bundle to Cisco TAC SRs opened to address the flagged checks.

  Result Bundle: /data/techsupport/Asraf/preupgrade_validator_2026-03-17T04-38-45+0000.tgz

==== Script Version v4.0.1 FIN ====
fab3-apic1#

asraf-khan added 2 commits March 11, 2026 12:08

Added check for CFD - CSCwr66848

d1abd86

Updated recommended_action message

270096a

lovkeshsharma702 reviewed Mar 13, 2026

View reviewed changes

aci-preupgrade-validation-script.py Outdated Show resolved Hide resolved